Automatic Vacuum Switch, Ortis Vacuum Switch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Keep Your Workplace Cleaner, Better for Your Lung
Product Description
In modern woodworking projects, maintaining the cleanliness of your tools presents a significant challenge. What’s even more concerning is that specific projects can generate a considerable amount of particles and dust, which poses a grave threat to both your workspace and your physical well-being.
However, there’s no need to worry. With the Ortis Automatic Vacuum Switch, it automatically activates your vacuum cleaner as you power on your electric tools. This switch is equipped with a delay function, featuring a 1-second delay when starting and a 7-second delay when turning off in auto mode. This upgrade boosts workspace cleanliness, letting you focus on your work without environmental worries. An essential tool for your woodworking.
Focus On Your Work
Addition of two tool outlets, then you can plug more than one tool. No need for extra extension socket, avoid messy cords and save time.
2 Installation Methods
Compared with other vacuum switch, Ortis vacuum switch for power tools offers two fixing methods, screw fastening and traceless wall-mounting adhesive, ensuring firm and reliable attachment
Why You Need a Automatic Vacuum Switch
– It eliminates the distraction of reaching for a vacuum while working with potentially dangerous power tools
– It ensures that dust and debris are collected as you cut, as opposed to being cleaned up with greater difficulty after the mess has been made.
– It minimizes hazardous airborne dust which can lead to a variety of ailments.
The New Ortis Autoswitch Features:
– Supports a wide range of cutting tools from rotary handheld devices to large shop saws
– Runs the vacuum only while you’re using your tool so you save time and electricity
– Helps to comply with OSHA requirements for dust control
– Optional 3 vacuum running modes: AUTO/OFF/ON
– Prevents circuit overload with 1s vacuum delay time
– When the load on the pool port is greater than 30 watts, the vacuum port is delayed for 1 second to open (in auto mode)
– Automatically delays vacuum turn-off by 7s to continue to clear the air while the motor spins down (in auto mode)
Ortis dust collector switch supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, 1875W
NEW GENERATION-TWO POWER TOOL OUTLETS: The Ortis vacuum switch features two tool outlets, allowing multiple tools to be easily connected without the need for additional power strips. It offers three vacuum operation modes: automatic, off, and on, with auto switching, enabling you to effortlessly save time and effort when starting your tools and vacuum cleaner, so you can focus on more important tasks
AUTOMATIC DELAY FEATURE: The auto vacuum switch comes with an automatic delay feature, which allows a 1-second delay when start the vacuum and automatically delays vacuum turn off by 7s (in auto mode). This helps prevent circuit overload, reduces dust in the air, keeps your workspace cleaner, and enhances your productivity. It’s an essential tool for your woodworking
EASY INSTALLATION: Compared with other vacuum switch, Ortis vacuum switch for power tools offers two fixing methods, screw fastening and traceless wall-mounting adhesive, ensuring firm and reliable attachment. You can effortlessly complete the installation, saving time and effort, and enhancing your user experience
SAFE AND RELIABLE: Utilizing UL-certified American standard 14AWG power cords, capable of handling currents of 30A and above. The application of reinforced copper cores and V0-rated flame-retardant materials in the outer casing reduces heat generation during usage, effectively extending the lifespan. It ensures safety, reliability, efficiency, and stability
COMPATIBILITY: Supports a variety of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, 1875W
$36.99
Price: $36.99
(as of Mar 14, 2024 23:56:37 UTC – Details)
Product Description
In modern woodworking projects, maintaining the cleanliness of your tools presents a significant challenge. What’s even more concerning is that specific projects can generate a considerable amount of particles and dust, which poses a grave threat to both your workspace and your physical well-being.
However, there’s no need to worry. With the Ortis Automatic Vacuum Switch, it automatically activates your vacuum cleaner as you power on your electric tools. This switch is equipped with a delay function, featuring a 1-second delay when starting and a 7-second delay when turning off in auto mode. This upgrade boosts workspace cleanliness, letting you focus on your work without environmental worries. An essential tool for your woodworking.
Focus On Your Work
Addition of two tool outlets, then you can plug more than one tool. No need for extra extension socket, avoid messy cords and save time.
2 Installation Methods
Compared with other vacuum switch, Ortis vacuum switch for power tools offers two fixing methods, screw fastening and traceless wall-mounting adhesive, ensuring firm and reliable attachment
Why You Need a Automatic Vacuum Switch
– It eliminates the distraction of reaching for a vacuum while working with potentially dangerous power tools
– It ensures that dust and debris are collected as you cut, as opposed to being cleaned up with greater difficulty after the mess has been made.
– It minimizes hazardous airborne dust which can lead to a variety of ailments.
The New Ortis Autoswitch Features:
– Supports a wide range of cutting tools from rotary handheld devices to large shop saws
– Runs the vacuum only while you’re using your tool so you save time and electricity
– Helps to comply with OSHA requirements for dust control
– Optional 3 vacuum running modes: AUTO/OFF/ON
– Prevents circuit overload with 1s vacuum delay time
– When the load on the pool port is greater than 30 watts, the vacuum port is delayed for 1 second to open (in auto mode)
– Automatically delays vacuum turn-off by 7s to continue to clear the air while the motor spins down (in auto mode)
Ortis dust collector switch supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, 1875W
NEW GENERATION-TWO POWER TOOL OUTLETS: The Ortis vacuum switch features two tool outlets, allowing multiple tools to be easily connected without the need for additional power strips. It offers three vacuum operation modes: automatic, off, and on, with auto switching, enabling you to effortlessly save time and effort when starting your tools and vacuum cleaner, so you can focus on more important tasks
AUTOMATIC DELAY FEATURE: The auto vacuum switch comes with an automatic delay feature, which allows a 1-second delay when start the vacuum and automatically delays vacuum turn off by 7s (in auto mode). This helps prevent circuit overload, reduces dust in the air, keeps your workspace cleaner, and enhances your productivity. It’s an essential tool for your woodworking
EASY INSTALLATION: Compared with other vacuum switch, Ortis vacuum switch for power tools offers two fixing methods, screw fastening and traceless wall-mounting adhesive, ensuring firm and reliable attachment. You can effortlessly complete the installation, saving time and effort, and enhancing your user experience
SAFE AND RELIABLE: Utilizing UL-certified American standard 14AWG power cords, capable of handling currents of 30A and above. The application of reinforced copper cores and V0-rated flame-retardant materials in the outer casing reduces heat generation during usage, effectively extending the lifespan. It ensures safety, reliability, efficiency, and stability
COMPATIBILITY: Supports a variety of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Table Saws, Power Sanders, Routers, Joiners, Planers etc. Max motor rating should not exceed 120V/15A 50/60Hz, 1875W
User Reviews
Be the first to review “Automatic Vacuum Switch, Ortis Vacuum Switch for More Power Tools, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping, Keep Your Workplace Cleaner, Better for Your Lung”
Related Products
$36.99
There are no reviews yet.